Electric Rectangle Valve

this valve is thin and alumina dense phase pipeline system pressure tank supporting the special valves. Adopt pneumatic device operation of valves open and close, with the valve shut in position feedback signal switch, but to realize the remote operation and automatic control system work procedures. Electromagnetic valve with the dust function, especially for more environment with dust.

Pneumatic Bell-type Valves

Type: ZZF
Specification: technical performance:
Nominal diameter: DN200, 300
Nominal pressure: PN1.0 Mpa
Applicable temperature: 120 ℃ than
Product description: this valve is thin and alumina dense phase pipeline system pressure tank supporting the special valves. Adopt pneumatic device operation of valves open and close, with the valve shut in position feedback signal switch, but to realize the remote operation and automatic control system work procedures. Electromagnetic valve with the dust function, especially for more environment with dust.

 

Over-low-pressure Safe Valves

Type: AQF

Specification: the main technical characteristics:
Nominal diameter: DN300mm
Nominal pressure: PN0.25 Mpa
Applicable temperature: 90 ℃ than
Applicable medium: gas powder gas mixture
Product description: this valve is installed in electrolytic aluminum powder conveying silo used to control the top and adjust internal pressure silo safety device, the product structure design is unique, call valve and the suction valve disc pressure are as heavy hammer type structure, keep open pressure is constant, not affected by temperature change, open height, use time length and other factors. Stable performance, reliability, service life long.

 

Pneumatic/Manual Single-board Regulating Valves

Type: TJF-D/S

Specification: technical performance:
Nominal diameter: DN500 ~ 600 mm
Applicable medium: smoke, and air, etc
Applicable temperature: 200 ℃ than
Product description: pneumatic/manual veneer regulator is installed in the flue gas pipelines, used to adjust and control gas flow; Also can be used in other collection system for gas flow rate of the adjustment and the control.

 

Pneumatic Rotary Material Cut-off Valves

Type: QDF
Specification: technical performance:
Nominal diameter: DN250
Applicable medium: aluminum oxide powder, particle materials, etc
Applicable temperature: 120 ℃ than
Product description: pneumatic return material cut-off valve is installed in a vertical line, can remotely operated and program automatic control, fast cutting off the media through the special valves.

              

Cylinder-type blanking devices

Type: XLQ

Specification: technical performance:
Set capacity: 1.8 L < or by user needs to make >
The capacity precision: 1%
At least cycle: 6 seconds/time
Applicable medium: alumina powder, powder particles
Applicable temperature: more than 150 ° C
Product description: this company is under cavitation device designed for electrolytic aluminum plant cell add raw materials (alumina powder) and design of the feeder under. It by cylinder body feeder, composition, structure design unique feeder ontology, advanced technology, without the wire wheel, need not the blow air, with the superior vena don't store material and reliable sealing, not leak materials, long service life, replace the cylinder is convenient wait for a characteristic.

 

Wafer Plugboard Material Cut-off Valves

Type: CBF
Specification: technical performance:
Nominal diameter: DN200 ~ 300
Applicable medium: aluminum oxide powder, powder particles
Applicable temperature: 150 ℃ than.
Product description: to clamp inserts plate material cut-off valve is installed in the vertical powder medium slipped on the tube, cut off the media through the valve. It has a good seal performance, no leakage \ outside leakage phenomenon, long service life, convenient operation, etc.

 

Electric Rectangle Valve

 The F-series electric rectangle valves manufactured by our company are specificaldesigned to control the opening and closing of gas medium with low corrosiveness andlarge flow rate. Two-stage worm wheel reduction box installed in the electric rectangle valvehas a large output torque. The angular transducer installed on the valve body can display the opening of the valve. F839-series electric rectangle valves can be matched with KJB (P)and KGB (P) valve controllers manufactured by our  company. As to KGB (P) valve controller, the control component adopts photoelectric insulation measures to make the safety voltage among the inputting, outputting and bottom shell exceeding 2KV. The inside of the various valve controllers is instal ed with overheat protection device, overcurrent protection device and open-phase protection device, which protect the electric rectangle valve as much as possible. Meanwhile the valve controller can be matched with resistance type, electromagnetic type and photoelectric type angular transducers to display the opening of the valve and also to complete distant automatic control and local manual control.
 

Characteristics:
    1. Electric rectangle valve adopts multi-valve-plate design with small opening and closing torque; the drive motor power is below 1.5KW.
    2. The valve adopts phosphor copper belt between the valve plates for sealing, with good sealing effects and little air leakage.

联系我们

客户热线
0411-83411085/13604255748

地址:中国.辽宁大连普兰店区皮口
E-mail:xinhaihb@126.com
邮编:116222

电话咨询
邮件咨询
在线地图
QQ客服